DS1302实时时钟模块1602显示.docx
- 文档编号:15263330
- 上传时间:2023-07-03
- 格式:DOCX
- 页数:12
- 大小:17.09KB
DS1302实时时钟模块1602显示.docx
《DS1302实时时钟模块1602显示.docx》由会员分享,可在线阅读,更多相关《DS1302实时时钟模块1602显示.docx(12页珍藏版)》请在冰点文库上搜索。
DS1302实时时钟模块1602显示
将实时时钟数据通过LCD1602显示
基于51单片机
**************************************************/
#include
#include
#defineucharunsignedchar
#defineuintunsignedint
uchardis_time_buf[16]={0};
//LCD1602引脚定义
//采用8位并行方式,DB0~DB7连接至LCDDATA0~LCDDATA7
sbitRS=P2A0;
sbitRW=P2A1;
sbitCS=P2A2;
#defineLCDDATAP0
//DS1302引脚定义
sbitRST=P1A3;
sbitIO=P1A2;
sbitSCK=P1A1;
//DS1302地址定义
#defineds1302_sec_add0x80//秒数据地址
#defineds1302_min_add
0x82
//分数据地址
#defineds1302_hr_add
0x84
//时数据地址
#defineds1302_date_add
0x86
//日数据地址
#defineds1302_month_add
0x88
//月数据地址
#defineds1302_day_add
0x8a
//星期数据地址
#defineds1302_year_add
0x8c
//年数据地址
#defineds1302_control_add
0x8e
//控制数据地址
#defineds1302_charger_add
0x90
#defineds1302_clkburst_add
0xbe
//初始时间定义
uchartime_buf[8]={0x20,0x10,0x06,0x01,0x23,0x59,0x55,0x02};//初始时间2010年6
月1号23点59分55秒星期二
//功能:
延时1毫秒
//入口参数:
x
//出口参数:
无
//说明:
当晶振为12M时,j<112;当晶振为11.0592M时,j<122
voidDelay_xms(uintx)
{
uinti,j;
for(i=0;i for(j=0;j<112;j++); //功能: 12us延时 //STC89C52为1T单片机,即1个时钟/机器周期,速度为AT89C52的12倍voidDelay_xus(uintt) { for(;t>0;t--) { _nop_(); } } //控制LCD写时序 voidLCD_en_write(void) { CS=1; Delay_xus(20); CS=0; Delay_xus(20); } //写指令函数 voidWrite_Instruction(ucharcommand) RS=0; RW=0; CS=1; LCDDATA=command; LCD_en_write();//写入指令数据 } //写数据函数 voidWrite_Data(ucharWdata) { RS=1; RW=0; CS=1; LCDDATA=Wdata; LCD_en_write();//写入数据 } //字符显示初始地址设置 voidLCD_SET_XY(ucharX,ucharY) { ucharaddress; if(Y==0) address=0x80+X;//Y=0,表示在第一行显示,地址基数为0x80 else address=0xc0+X;//Y非0时,表时在第二行显示,地址基数为0xC0 Write_Instruction(address);//写指令,设置显示初始地址 } //在第X行Y列开始显示Wdata所对应的单个字符 voidLCD_write_char(ucharX,ucharY,ucharWdata) { LCD_SET_XY(X,Y);//写地址 Write_Data(Wdata);//写入当前字符并显示 } //清屏函数 voidLCD_clear(void) { Write_Instruction(0x01); Delay_xms(5); } //显示屏初始化函数 voidLCD_init(void) { Write_Instruction(0x38);//8bitinterface,2line,5*7dots Delay_xms(5); Write_Instruction(0x38); Delay_xms(5); Write_Instruction(0x38); Write_Instruction(0x08); Write_Instruction(0x01); Delay_xms(5); Write_Instruction(0x04); //Write_Instruction(0x05); //Write_Instruction(0x06); //Write_Instruction(0x07); Delay_xms(5); //Write_Instruction(0x0B); Write_Instruction(0x0C); //Write_Instruction(0x0D); //Write_Instruction(0x0E); //Write_Instruction(0x0F); } //关显示,不显光标,光标不闪烁 //清屏 //写一字符,整屏显示不移动 //写一字符,整屏右移 //写一字符,整屏显示不移动 //写一字符,整屏左移 //关闭显示(不显示字符,只有背光亮) //开显示,光标、闪烁都关闭 //开显示,不显示光标,但光标闪烁 //开显示,显示光标,但光标不闪烁 //开显示,光标、闪烁均显示 //DS1302初始化函数 voidds1302_init(void) SCK=0;//SCK脚置低 } //向DS1302写入一字节数据 voidds1302_write_byte(ucharaddr,uchard) { uchari; RST=1;//启动DS1302总线 //写入目标地址: addr addr=addr&0xFE;//最低位置零,寄存器0位为0时写,为1时读 for(i=0;i<8;i++){ if(addr&0x01){ IO=1; } else{ IO=0; } SCK=1;//产生时钟 SCK=0; addr=addr>>1; } //写入数据: d for(i=0;i<8;i++){ if(d&0x01){ IO=1; } else{ IO=0; } SCK=1;//产生时钟 SCK=0; d=d>>1; } RST=0;//停止DS1302总线} //从DS1302读出一字节数据uchards1302_read_byte(ucharaddr){ uchari,temp; RST=1;//启动DS1302总线 //写入目标地址: addr addr=addr|0x01;//最低位置高,寄存器0位为0时写,为1时读 for(i=0;i<8;i++){ if(addr&0x01){ IO=1; } else{ IO=0; } SCK=1; SCK=0; addr=addr>>1; } //输出数据: temp for(i=0;i<8;i++){ temp=temp>>1; if(IO){ temp|=0x80; } else{ temp&=0x7F; } SCK=1; SCK=0; returntemp; } //向DS302写入时钟数据 voidds1302_write_time(void) { ds1302_write_byte(ds1302_control_add,0x00);//关闭写保护 ds1302_write_byte(ds1302_sec_add,0x80);//暂停时钟 //ds1302_write_byte(ds1302_charger_add,0xa9);//涓流充电 ds1302_write_byte(ds1302_year_add,time_buf[1]);//年 ds1302_write_byte(ds1302_month_add,time_buf[2]);//月 ds1302_write_byte(ds1302_date_add,time_buf[3]);//日 ds1302_write_byte(ds1302_hr_add,time_buf[4]);//时 ds1302_write_byte(ds1302_min_add,time_buf[5]);//分 ds1302_write_byte(ds1302_sec_add,time_buf[6]);//秒 ds1302_write_byte(ds1302_day_add,time_buf[7]);//周 ds1302_write_byte(ds1302_control_add,0x80);//打开写保护 } //从DS302读出时钟数据 voidds1302_read_time(void) { time_buf[1]=ds1302_read_byte(ds1302_year_add);//年 //月 time_buf[2]=ds1302_read_byte(ds1302_month_add); time_buf[3]=ds1302_read_byte(ds1302_date_add);//日 time_buf[4]=ds1302_read_byte(ds1302_hr_add);//时 time_buf[5]=ds1302_read_byte(ds1302_min_add);//分 time_buf[6]=(ds1302_read_byte(ds1302_sec_add))&0x7f;//秒,屏蔽秒的第7位,避免超出59 time_buf[7]=ds1302_read_byte(ds1302_day_add);//周 } voidDisplay(void) { LCD_write_char(3,0,dis_time_buf[0]+'0'); LCD_write_char(4,0,dis_time_buf[1]+'0'); LCD_write_char(5,0,dis_time_buf[2]+'0'); LCD_write_char(6,0,dis_time_buf[3]+'0'); LCD_write_char(7,0,'/'); LCD_write_char(8,0,dis_time_buf[4]+'0'); LCD_write_char(9,0,dis_time_buf[5]+'0'); LCD_write_char(10,0,'/'); LCD_write_char(11,0,dis_time_buf[6]+'0'); LCD_write_char(12,0,dis_time_buf[7]+'0'); LCD_write_char(15,0,dis_time_buf[14]+'0'); //第2行显示 LCD_write_char(3,1,dis_time_buf[8]+'0'); LCD_write_char(4,1,dis_time_buf[9]+'0'); LCD_write_char(5,1,': '); LCD_write_char(6,1,dis_time_buf[10]+'0'); LCD_write_char(7,1,dis_time_buf[11]+'0'); LCD_write_char(8,1,': '); LCD_write_char(9,1,dis_time_buf[12]+'0'); LCD_write_char(10,1,dis_time_buf[13]+'0'); } //定时器中断函数 voidTimer2()interrupt5//定时器2是5号中断 { staticuchart; TF2=0; t++; if(t==4)//间隔200ms(50ms*4)读取一次时间 { t=0; ds1302_read_time();//读取时间 dis_time_buf[0]=(time_buf[0]>>4);// dis_time_buf[1]=(time_buf[0]&0x0f); dis_time_buf[2]=(time_buf[1]>>4); dis_time_buf[3]=(time_buf[1]&0x0f); dis_time_buf[4]=(time_buf[2]>>4);//月 dis_time_buf[5]=(time_buf[2]&0x0f); dis_time_buf[6]=(time_buf[3]>>4);//日 dis_time_buf[7]=(time_buf[3]&0x0f); dis_time_buf[14]=(time_buf[7]&0x07);//星期 //第2行显示 dis_time_buf[8]=(time_buf[4]>>4);//时 dis_time_buf[9]=(time_buf[4]&0x0f); dis_time_buf[11]=(time_buf[5]&0x0f); dis_time_buf[12]=(time_buf[6]>>4);//秒dis_time_buf[13]=(time_buf[6]&0x0f); } } //定时器2初始化 voidInit_timer2(void) { 50ms RCAP2H=0x3c;//赋T2初始值0x3cb0,溢出20次为1秒,每次溢出时间为RCAP2L=0xb0; TR2=1;//启动定时器2 ET2=1;//打开定时器2中断 EA=1;//打开总中断 } //主函数 voidmain(void) Delay_xms(50);//等待系统稳定 LCD_init();//LCD初始化 LCD_clear();//清屏ds1302_init();//DS1302初始化 Delay_xms(10); ds1302_write_time();//写入初始值 Init_timer2();//定时器2初始化 while (1) { Display();
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- DS1302 实时 时钟 模块 1602 显示