UG NX与英语.docx
- 文档编号:6263458
- 上传时间:2023-05-09
- 格式:DOCX
- 页数:36
- 大小:432.61KB
UG NX与英语.docx
《UG NX与英语.docx》由会员分享,可在线阅读,更多相关《UG NX与英语.docx(36页珍藏版)》请在冰点文库上搜索。
UGNX与英语
1.5.2
TheResourcebar资源条
TheResourcebaristhesetoftabslocatedalongtheedgeoftheNXwindow.
资源条位于NX窗口的左边。
ThelocationoftheResourcebar,aswellasthetabsdisplayedonthebar,mayvarydependingonyourspecificconfiguration.
资源条的位置及其显示的选项,都取决于你的设置。
TheResourcebarcanbeconfiguredtodisplaytotheleftortherightoftheNXwindow.Itcanalsobeastandalonetoolbar.
资源条可以位于窗口的左边或者右边。
它也可以做为一个独立的工具栏来使用。
TheResourcebarisdividedintothreemaincategories:
资源条由三部分组成:
1.Navigators导航器
2.IntegratedBrowserWindow(Windowsonly)内置浏览器(仅Windows用户适用)
3.Palettes 面板
Activity:
ChangethedisplayoftheResourcebar练习:
更改资源条的位置
InthisactivityyouwillchangethedisplayoftheResourcebar.在这个练习中我们将尝试更改资源条的显示位置:
ChangethedisplayoftheResourcebar更改资源条的位置
1.OpenthepartandchangetheUserInterfacePreferences. 打开部件,更改一些用户界面设置
OpentheColorpart. 打开Color 部件
OnthemenubarchoosePreferences→UserInterface. 在菜单栏上选择首选项--用户界面
TheUserInterfacePreferencesdialogboxappears. 用户界面对话框弹出
ClicktheLayouttab. 单击 排样(布局)选项卡
2.ViewtheResourcebarasafloatingtoolbar. 注意观察下浮动的工具栏
3.
IntheResourceBargroup,selectAsToolbarintheDisplayResourceBarlistandclickOK.
在资源条选项中,选择“如工具栏‘,确定。
TheResourcebarfloatsinthegraphicswindowasastandalonetoolbar.资源条做为一个单独的工具栏,如下图所示:
UsethesameprocesstoreturntheResourcebarbacktoitsoriginalposition.使用相同的方法,使资源条返回原始位置。
Closethepart. 关闭部件
Resourcebar–navigators 资源条---导航器
TheResourcebarprovidesaccesstotwostandardnavigatorsfromtheGatewayapplication.
在基本环境模块中,NX提供了两种标准的导航器:
1.AssemblyNavigator 装配导航器
2.PartNavigator 部件导航器
Thesenavigatorsprovidegraphicalrepresentationsofthedisplayedpart.Theyalsoofferaneasywaytomanipulateandeditdata.
这些导航器可以帮助我们更好的了解部件。
通过这些导航器我们可以更方面的编辑部件。
Dependingontheapplicationthatyouarerunning,youmayhaveaccesstoadditionalNavigatorsthatarespecifictothoseapplications.
不同的模块,会有不同的导航器。
Note:
注意:
ThePartNavigatorisavailablefromallNXapplications.FeatureeditingoperationscanonlybeperformedintheModelingapplication.
部件导航器适用于NX所有模块。
特征编辑命令仅适用于建模模块。
Resourcebar–integratedwebbrowsers[Windowsplatformonly] 资源条-浏览器(仅Windows用户适用)
TheResourcebarincludesintegratedwebbrowserwindows,whichprovideaseamlessswitchbetweenawebbrowserandNX.
资源条整合了Windows的IE浏览器,它可以让我们在NX与IE之间无缝切换。
YoucanconfiguretheInternetExplorerbrowserwindowforeasyaccesstocompanyorprojectteaminformation,suchasstandardsorbestpractices.你可以通过NX内置的IE浏览器访问公司或则项目团队的内部信息,比如标准等。
Note:
注意:
ReferencetheUserInterfacePreferencesdialogformoreonhowtoconfigurethiswindow.
我们可以通过首选项对话框来设置NX内置的浏览器。
Note:
注意
IntegratedwebbrowsersarecurrentlyonlyavailableinWindows. 内置浏览器仅适用于Windows用户
Resourcebar–palettes资源条--资源板
Palettesprovideaccesstostandardandfrequentlyusedmodeldata.Youcanaddobjectsbyeitherthedrag,orthecutandpastemethodsfromanopenpalettetoyourNXsession.
面板提供了一些常用选项。
你可以自定义控制面板的选项。
TheHistorypalette
providesfastaccesstorecentlyopenedfiles.Useittoreloadpartsthatyourecentlyworkedon,ortorepeatedlyaddasmallsetofpaletteitemstoamodel 历史记录
面板,可以让我们快速的打开最近打开过的部件。
TheHistoryPalettedisplaysthenamesofthepartfilesyouopenedinsessionsrangingfrom“Today”to“LastWeek”to“3WeeksAgo”and“Older.”PartswilldisplayintheHistoryPaletteastheywerelastsaved.
历史记录资源板显示以前打开过的部件的名称,范围包括,今天、昨天、上周、三周前或更多的记录
Moreaboutpalettepreferences 更多的资源板参数
Palettepreferences资源板参数
YoucancustomizeyourpalettesbyusingthePalettedialogbox.ThePalettedialogboxisaccessedunderPreferences→Palettes.
你可以通过面板对话框来定定义对话框界面。
你可以通过首选项-资源板来设置参数。
Youcanusetheseoptionstocreatenewpalettes,toaddapalettefiletotheResourcebar,toaddadirectoryasapaletteortoopenadirectoryasatemplatepalette.你可以使用这些选项创建新的资源板,或者添加资源板文件到资源条中,打开目录做为一个资源板
Youcanalsoperformoperationsontheexistingpalettes(thosedisplayedinthelist).YoucanselectapaletteandreorderitsdisplayintheResourcebarordeletethepaletteormodifythepaletteproperties.
你也可以对已存在的一些资源板做一些操作(显示在列表中的资源板)。
你也可以对显示在列表中的资源板排序、删除或者修改资源板的属性。
Note:
注意:
ThesetupandapplicationofpalettesarebeyondthescopeofthiscourseandarecoveredinmoredetailintheDraftingandShape
StudioFundamentalscourses.TheNX6HelpLibraryalsocontainsmoredetailedinformationaboutpalettes.
建立应用模块的资源板也属于本节课的范围,更多细节将在制图和自由形状建模模块课程中讲解。
NX6的中文帮助文件也包括了更多的关于资源板的信息。
1.5TheNXuserinterface(NX用户界面)
Inthispartofthelesson,youwill:
在这节课中你将学到:
Recognizethetitlebar. 深入了解标题栏
UsetheCuelineandStatusline.使用提示栏和状态栏
Useandcustomizetoolbars.使用和自定义工具栏
Useandcustomizemenus. 使用和自定义菜单栏
AccesstheViewPopupmenu使用右键弹出菜单
Workinfullscreendisplaymode 全屏工作模式
Useandcustomizedialogboxes.使用和定制对话框
ChangeRenderingStylesandcolorsettings. 更改渲染模式和颜色设置
Thetitlebar标题栏
ThetitlebarofthemainNXwindowindicatesthereleaseofNXyouareworkinginaswellasthenameoftheactiveapplication(inthecaseofthegraphicbelow,theModelingapplicationisopen.) NX的标题栏标明了NX的版本及当前工作的模块名称,如下图所示:
Ifthegraphicswindowisopenbutnotmaximized,thenameoftheopenedpartappearsinthetitlebarofthegraphicsarea.
如果绘图窗口没有最大化显示,则标题栏显示的位置如下图所示:
Thewords"ReadOnly"tellyouthatthispartcannotbesavedwithitscurrentname.Ifyoudidmakeanychangestothispart,youwouldneedtorenameitbeforeyoucouldsaveit.
“只读”的意思是告诉我们,当前打开的部件不可以保存。
如果你想保存这个部件,则需要使用另保存命令。
1.4ExitNX退出NX
Inthispartofthelesson,youwill:
在这节课中,你将学到:
Reviewthedifferentexitandclosecommands.复习一下不同的退出及关闭命令
1.4.1ExitandClose退出和关闭
BothFile→ExitandFile→Closeenableyoutoimmediatelysavemodifiedfiles.ThefollowingtableslisttheoptionsavailableintheExitandintheClosedialogboxeswhenyoudonotfirstselectaspecificsaveoperation.
文件-退出和文件-关闭都可以让你快速的保存做过的修改。
下表列出了退出与关闭对话框的一些信息:
Exitdialogbox ‘退出’对话框
Button按钮
Action作用
Yes–SaveandExit 是-保存和退出
SavesmodifiedfilesandexitsNX.保存修改的部件和退出NX
No–Exit 否--退出
ExitsNXwithoutsavinganychangestothefiles.不保存部件和退出NX
Cancel取消
RevokestheExitcommand.撤销退出命令
Closedialogbox 关闭对话框
Button按钮
Action作用
Yes–SaveandClose 是-保存和关闭
Savesmodifiedfilesandclosesthem.保存修改的文件和关闭它们
No–Close 否--关闭
Closesthefileswithoutsavinganychanges.不保存修改的文件
Cancel 取消
RevokestheClosecommand. 撤销关闭命令
EndingtheNXsession退出NX
ToendanNXsession:
我们可以通过以下两种方法来关闭NX
Closeallofthepartfiles(savingornotsavingthemasrequired). 关闭所有的部件文件(根据要求保存或不保存)
ChooseFile→Exit. 选择文件--退出
Note:
注意:
IfyouintendtocontinuetothenextactivityyoushouldnotendyourNXsession.
如果你想继续学习下一节课,则不需要退出NX.
1.3.3Createanewpartfromatemplateandsaveit 从模板创建一个新的部件和保存部件
Createanewpartfromatemplate.从模板创建一个新的部件
1.
OntheStandardtoolbarclickNew
. 在标准工具栏上选择新建
TheNewdialogboxisdisplayed.Usethetabsatthetopofthedialogboxtoselectyourdesiredsetoftemplatefiles.
新建文件的对话框弹出,我们可以通过对话框顶部的选项卡选择想要的模板类型
ClicktheModeltab. 选择 模型选项卡
TheTemplatelistshowsalltheavailabletemplatefilesfortheModeltabandtheselectedunitofmeasurement.
在模型选项卡下列出了当前可用的的模板以及模板单位
SelectModel.选择模型
2.Definethepropertiesofthenewpart. 定义新部件的属性
Definethetypeofunitsyouwant-MillimetersorInches.InthiscaseyouwillcreateapartinMillimeters.
选择你想要的单位类型-毫米或者英寸。
在这个例子中我们选择,毫米。
VerifythatUnitsissettoMillimeters.
确认一下,单位是否选择的是毫米。
3.Changethenameofthepart.更改部件的名称。
IntheNewFileNamegroup,double-clickintheNameboxtofocusit. 在“新文件名”对话框中,双击“名称”
Typeyourlastname(uselowercaselettersbutNOspaces).
输入您的“姓”(使用小写字母,但是不要有空格)编者注:
UG不支持中文字符,所以这里大家要输入英文名称
Thesystemwillautomaticallyaddthe.prtextensionafteryoutypethepartname.
NX将会自动添加文件的扩展名“.prt”
4.Changethedirectorywherethisnewfilewillbeplacedwhensaved.
选择文件存储的目录编者注:
UG不支持中文字符,所以这里大家要选择一个没有中文字符的目录
5.
ClickOpen
nexttotheFolderbox. 选择“打开
”然后选择“文件夹”
6.TheChooseDirectorydialogboxopens. 选择文件目录。
。
7.
NavigatetothebasicsdirectoryandclickOKontheChooseDirectorydialogbox. 选择存储路径,然后确定
ClickOKontheNewdialogbox. 确定
Thenewpartiscreatedbutnotsaved.部件已新建,但还未保存。
ThepartwithyourlastnameisnowtheDisplayedPart.Noticethenameyougavetothepartisdisplayedinthetitlebar.
注意观察下标题栏。
8.Savethepart. 保存部件。
Tip:
提示:
Remember,youmaybeworkinginaread-onlydirectory,soyoumaynotbeabletosaveanyparts.
注意,也许你的文件目录是一个‘只读’的,因此你可能不能保存任何部件。
ClickFile→Save. 选择文件---保存。
Ifyouareworkinginaread-onlyprotecteddirectory,youwillreceivea"SaveWarning"message.
如果你存储的文件目录是‘只读’的,那么系统将会提示你“保存警告”
ClickOKontheSaveWarning,ifnecessary.
如果需要,选择‘确定’,关闭该对话框
9.Performasaveas.练习一下另存为
ClickFile→SaveAs. 选择文件---另存为
TheSaveAsdialogboxisdisplayed. ‘另存为’对话框弹出
Savethispartunderanewname 重新输入一个新的名字,保存。
TypethenewnameintotheFilenamebox,thenclickOK. 在新文件名输入框中键入先的名称,确定。
Note:
注意:
Savingafileunderanewnamedoesnotreplacetheoriginal.
另保存的文件不会替换原来的文件。
CanceltheSaveAsdialogbox. 取消另存为对话框
Closeallparts. 关闭所有部件
1.4ExitNX退出NX
Inthispartofthelesson,youwill:
在这节课中,你将学到:
Reviewthedifferentexitandclosecommands.复习一下不同的退出及关闭命令
1.4.1ExitandClose退出和关闭
BothFile→ExitandFile→Closeenableyoutoimmediatelysavemodifiedfiles.ThefollowingtableslisttheoptionsavailableintheExitandintheClosedialogboxeswhen
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- UG NX与英语 NX 英语