1、创建一个bridge，把其他局域网口添加到bridge中。添加其他局域网口到bridge中DHCP 服务器设置局域网自动获取IP地址局域网的网段为 把作为内网的网关设置网关的地址，接口添加到bridge1上一般我们用DHCP setup来自动设置DHCP server这种设置比拟简单快速路由配置：所有的根本配置都设置好了，局域网可以正常上网了，但是为了实现更好的网络环境，我们需要做更好的策略。这就需要使用PCC了，下面就看看PCC怎么做的吧。二、PCC的配置Mangle标记标记内网地址为0.0的五条线路的连接标记标记第一条连接：同理：配置剩余的4调链路：5/1,c2; 5/2.c3; 5/3,
2、c4; 5/4,c5.从连接中提取路由标记：从连接里提取路由标记标记第一条连接c1，命令为R1提出其他4调路由命名为R2,R3,R4,R5.标记连接，的命名配置方式为：adminMikroTik /ip firewall mangle print Flags: X - disabled, I - invalid, D - dynamic 0 chain=prerouting action=mark-connection new-connection-mark=c1 passthrough=yes srcdst-address-type=!local per-connection-classif
3、ier=both-addresses:5/0 1 chain=prerouting action=mark-connection new-connection-mark=c2 5/1 2 chain=prerouting action=mark-connection new-connection-mark=c3 5/2 3 chain=prerouting action=mark-connection new-connection-mark=c4 5/3 4 chain=prerouting action=mark-connection new-connection-mark=c5 5/4 提
4、取路由的命令 5 chain=prerouting action=mark-routing new-routing-mark=R1 passthrough=yes src 6 chain=prerouting action=mark-routing new-routing-mark=R2 passthrough=yes 7 chain=prerouting action=mark-routing new-routing-mark=R3 passthrough=yes 8 chain=prerouting action=mark-routing new-routing-mark=R4 passt
5、hrough=yes 9 chain=prerouting action=mark-routing new-routing-mark=R5 passthrough=yes 回程路由设置需要将从那个口进入就从相应的口回去，即保证每个外网口的数据能得到正确的路由同理标记c2,c3,c4,c5的回程路由提取回程路由同理提取c2,c3,c4,c5命令方式：10 chain=input action=mark-connection new-connection-mark=c1 passthrough=yes in-interface=pppoe-out1 11 chain=input action=ma
6、rk-connection new-connection-mark=c2 passthrough=yes in-interface=pppoe-out2 12 chain=input action=mark-connection new-connection-mark=c3 passthrough=yes in-interface=pppoe-out3 13 chain=input action=mark-connection new-connection-mark=c4 passthrough=yes in-interface=pppoe-out4 14 chain=input action
7、=mark-connection new-connection-mark=c5 passthrough=yes in-interface=pppoe-out5 15 chain=output action=mark-routing new-routing-mark=R1 passthrough=yes connection-mark=c1 16 chain=output action=mark-routing new-routing-mark=R2 passthrough=yes connection-mark=c2 17 chain=output action=mark-routing new-routing-mark=R3 passthrough=yes connection-mark=c3 18 chain=output action=mark-routing new-routing-mark=R4 passthrough=yes connection-mark=c4 19 chain=output action=mark-routing new-routing-mark=R5 passthrough=yes connection-mark=c5路由设置添加五条默认路由，指定标记的路由内网PC上开启迅雷下载资料，可以看到所有的拨号出口都有流量
