1、各类合同中英文样本含15份各类合同中英文样本含份、加工装配合同。、补偿贸易合同。、货物出口合同。、货物进口合同。、技术合作经营企业合同。、聘请外籍教师合同。、销售合同。、房屋租赁合同。、国际咨询技术效劳合同。、专用技术合同效劳附件。、商标许可合同。、专有技术许可证合同。、中外合作经营合同。、中外合资经营合同。、成套设备进口合同。一、加工装配合同合同号：_ 签订日期：_ 签约地：_ 甲方加工装配方：_公司 地址：_ ：_ ：_电子邮箱：_ 乙方来料、来件方：境外_ 地址：_ ：_ ：_电子邮箱：_ 双方在遵守中华人民共和国法律、法规的前提下，本着本等互利的原那么，就来料加工_进行了充分协商，一致
2、达成如下合同条款： 一、双方责任 1甲方责任： 1提供有上盖之厂房_平方米，无上盖场地_平方米，工厂管理人员_名，生产工人_名、开业后_月增至_名。在合同期内代乙方加工生产上述产品，加工成品后交回乙方复出。 2提供现有水、电设备供加工生产之用，如需新安装水、电设施，其费用由乙方支付。 3办理来料加工、装配有关业务的进出口手续及对工厂实行行政、财务等管理，不得把工作以任何形式承包给任何单位和个人经营。 2乙方责任： 1不作价提供加工上述产品及装修厂房和建造_平方米简易厂房所需的设备材料详见清单，分多批运抵甲方工厂，设备总值约_万元。 2不作价提供加工上述产品所需的原料、辅料和包装物料，具体数量、
3、规格在各份具体生产加工合同中订明。 3工人如因工作不力含工厂管理人员，经教育无效者，乙方有权向甲方提出调换，但禁止非法搜查甲方工厂工人的身体。 二、加工数量 第一年加工上述产品，加工费约_万元，从第二年开始的产量，应在前一年的根底上有所增加，具体数量应在生产合同中订明。 三、作价原那么和工缴费 1试产培训期为二个月，在试产期内，工人每人每月工缴费暂定为_元，每月工作_日，每天_小时。 2试产期满后，采取按件计算方式，在坚持互利原那么的根底上、双方应根据加工的品种、规格、款式和工艺繁简不同进行定价，并在生产加工合同中订明为确保工人的合理收入，工缴费平均每人每月不低于_元。需要加班时，加班费另计，
4、但每个工人每天加班时间最长不得超过_小时。 3甲方工人生产消耗的水、电费由乙方负责。 4每月乙方支付甲方_元，作为工作管理费。 四、损耗率 1试产期内的消耗率，实报实销。 2试产期后的损耗率，由双方商定，并在生产加工合同中订明。 五、来料和交货期 1乙方按生产合同的加工量，按月提供足够数量的原辅材料和包装物料。为使甲方工厂能正常生产，乙方必须在每批产品开始加工前_天，将所需的原材料和包装物料运抵甲方工厂。除因人力不可抗拒之原因外，乙方来料缺乏，造成甲方工厂每月生产缺乏_天，停工天数累计不得超过四天，否那么，乙方应按 在厂工人以停工天数计，每人每天补助生活费_元，支付给甲方工厂。 2为使乙方能开
5、展正常的业务活动，甲方应向乙方按商定的交货期，按时、按质、按量交货。如非人力不可抗拒原因，甲方不按时、按质、按量交货，造成乙方的经济损失，甲方应负赔偿之责任，赔偿数额可在具体的生产加工合同中订明。 3由乙方提供的机械、通风、照明等设备及原辅材料、包装物料，在甲方工厂由双方进行交收登记，建立帐册。甲方工厂加工后的成品，在甲方工厂经乙方验收起运后，甲方不负产品规格、质量、短缺等任何责任。 六、结汇形式 工缴费及工人管理费每月结算一次，以D/P即期结汇或支票方式结汇，由甲方工厂会同_政府授权的处理来料加工事务并具有外贸经营权的_贸易公司(下称授权贸易公司)开具发票后，通过中国银行深圳分行向乙方在香港
6、开户的银行_银行。帐号_办理。乙方超过_天仍未付款给甲方，那么按逾期天数，以当时香港银行利息一并付给甲方。乙方连续_个月不结汇，甲方有权采取停止出货或其它措施。 七、劳动保护及运输与保险 1工厂应做好劳动保护及平安工作，完善防尘、防烟、防毒设施，厂房保持通风光亮，内外环境卫生整洁，对有污染性工程，须经市环保部门批准，方能立项经营。 2乙方提供的机械、通风、照明设备、原辅材料、包装物件及甲方工厂加工后的成品运输费用，均由乙方负责。 3原辅材料、包装物料的运进，成品运出及加工期间存放的机械设备、原料和包装物料及操作机械的工人，均由乙方向_保险公司投保。 八、技术交流 在设备运抵甲方工厂后，乙方应尽
7、快派出人员进行安装，甲方派出人员进行协助。从试产期开始，乙方应派出技术人员到甲方工厂进行技术培训，直到工人能根本掌握生产技术，进行正常生产时为止。乙方技术人员的工资及一切费用由 乙方负责，甲方提供生活上的方便。 九、合同期限 本合同经批准签订后，乙方须将商业登记及银行资信证明书交甲方办理营业 执照经海关备案生效。有效期为_年，即从_年_月_ 日至_年_月_日。如要提前终止或延长本合同，须在三个月前通知对方，并经双方协商处理终止或延长合同事宜。某方单独提前终止合同，要负责补偿对方的经济损失。补偿的方法，根据终止合同前半年内的每月平均工缴费为准，补偿两个月的工缴费总额给对方。 合同期满后，不动资产
8、如厂房、宿舍归甲方所有，由乙方不作价提供的可动产如机械、车辆、通风设备归乙方所有，并按海关和有关规定及时办理核销手续。 双方同意，在本合同经批准签订后_天内，乙方向甲方预付_元，作为履约保证金，从甲方收到履约金之日起_个月内，乙方仍不投产开业，履约保证金即无条件归甲方所有，同时，甲方有权废约。如乙方能按时投产开业，该履约保证金可作工缴费抵付给甲方。 十、仲裁 凡因本合同引起的或与本合同有关包括任一生产加工合同的任何争议，应通过友好协商解决，协商不能解决，均应提交中国国际经济贸易仲裁委员会深圳分会，按照申请仲裁时该会施行有效的仲裁规那么进行仲裁。仲裁裁决是终局的,对双方均有约束力。 十一、语言
9、本合同以英文和中文书就，两种文本具有同等效力。但在对其解释产生异议时，以中文文本为准。 十二、合同的份数和修订 本合同正本一式五份，甲、乙双方、海关、车管所、政府授权的处理来料加工事务并有外贸经营权的_公司各一份，副本假设干份，均具有同等效力。 本合同有如未尽事宜，双方可随时补充或修改，并报政府有关部门批准实施。 甲 方：_ 乙 方：_ 授权代表：_ 授权代表：_ 授权贸易公司：_ 代表(签字：_ CONTRACT FOR PROCESSING & ASSEMBLY Contract No: _ Conclusion Date: _ Conclusion Place: _ Party A: _
10、 Company (Party of Processing or Assembling) Legal Address: _ Tel: _ Fax: _ E-mail: _ Party B:_ Ltd. (Party of Supplying Materials and Parts) Legal Address: _ Tel: _; Fax: _; E-mail: _ Party A and Party B, according to the laws and policies of the Peoples Republic of China and the relevant regulatio
11、ns and the principles of equality and mutual benefit, have held discussions relating to the processing and assembling of (plastic toy products) and have reached agreement on the following contractual clauses: 1. Responsibilities (1)Responsibilities of Party A 1) Party A shall provide factory space c
12、onsisting of _ square metres, field of _ square metres without covering, _ factory management person and _ workers for the first phase. The number of workers shall be increased to _ twelve months after operation. Within the Contract term, Party A shall process the products for party B which shall be
13、 re-exproted to _. 2) The water supply and utility equipment required for processing shall be provided by Party A. If additional installations of water and electric facilities are required, the expenses thereof shall be borne by Party B. 3) Party A shall arrange all the necessary import and export a
14、pprovals required for processing and assembly and provide administration and accounting management for the processing plant. Party A cannot assign Party As responsibilities to any other party or individual in any way. (2) Responsibilities of Party B 1) To provide the equipment with the total value o
15、f _. 2) To provide the raw materials, indirect materials and packaging materials for processing the products. Quantities and specifications are to be specified in separate processing contracts. 3) In the event any personnel, including management shows substandard performance and makes no improvement
16、 after retraining, Party B shall have the right to request Party A to replace such persons. However, any physical search of the workers shall be regarded as illegal and prohibited. 2. Quantity of Products During the first year, the total processing fee shall amount to _. From the second year, the qu
17、antity shall be increased. Details shall be specified in separate processing contracts. 3. Price & Salary (1) The trial production (including training) period shall be _. During such period, the workers shall be paid _ per month on the basis of _ working days per month and _ working hours per day. (
18、2) After the trial production period, the workers payment shall be calculated according to actual production quantities. On the basis of mutual benefit, both parties shall consider the processing fee, which shall be specified in separate processing contracts, according to different kinds of products
19、, specifications, styles and engineering procedures. In order to ensure the reasonable income of the workers, the workers monthly salary shall be maintained no lower than _. If overtime work is required, payment shall be calculated separately. However, overtime shall not exceed _ hours a day. (3) Ex
20、penses for water and electricity in Party As plant shall be borne by Party B. (4) Every month Party B shall pay _ to Party A for management expenses. 4. Proportion Products Damaged (1) During the trial production period, Party B shall absorb the cost of products damaged. (2) After the trial producti
21、on period, the proportion of damaged products shall be mutually considered and decided by both parties and specified in separate processing contracts. 5. Shipment of Raw Materials & Finished Products (1) Every month, Party B shall provide sufficient raw materials and packaging materials according to
22、 the contracted processing volume. To ensure the normal production of Party As plant, Party B shall ship such materials to the plant_ days before the production of each lot of products. Except for reason of force majeure, the plant shall operate for more than _ days in a month. In case production is
23、 held up for _ days to insufficient supply of raw materials, Party B shall calculate the actual days when production is shut down and pay to Party A the workers living expenses at the rate of _ per person per day. (2) To ensure the normal operation of Party Bs business activities, Party A shall deli
24、ver the finished products to Party B in accordance with the time of delivery, quality and quantity. Except for reason of force majeure, in case losses to Party B are caused due to Party As failure to make delivery as mentioned above, Party A shall be responsible for the compensation. Details of such
25、 compensation shall be mutually agreed upon in separate processing contracts. (3) Both parties shall mutually inspect and document the equipment and materials provided by Party B, such as machinery, ventilation and lighting equipment and raw materials. After the finished products are inspected and s
26、hipped from the plant by Party B, Party A shall be free of any responsibility in regard to specifications, quality and quantity, etc. 6. Method of Payment Payment of workers salary and management fee shall be settled once a month by D/P, which shall be conducted through Bank of China _Branch by Part
27、y Bs bank in _ (_Bank, Account NO._) in accordance with the invoices issued by Party A and a Trade Company (authorized by the local government to be in charge of affairs of processing and assembly and with foreign trade authority, hereinafter referred to as the Authorized Trade Company). In case Par
28、ty Bs payment is delayed for _ days, Party B shall be responsible for the interest incurred according to the banks interest rate; in case payment is not settled for _ consecutive months, Party A shall have the right to suspend delivery of the finished products or take other measures. 7. Labour Protection & Insurance (1) The plant shall take safety measures and protect the workers from dirt, smoke and poisonous materials. The factory shall be maintained ventilated and bright, and the surroundings clean and tidy. (2) The transportation expenses for the machinery, ventilation and lighting
